(Solved): The horizontal beam of Section shown in the Figure below is 4m long and is simply supported at the ...

The horizontal beam of Section shown in the Figure below is 4m long and is simply supported at the ends. Calculate the maximum UDL it can carry if the tensile and compressive stresses must bot exceed 25 MN/m2 and 45 MN/m2 respectively 0 © 20 mm 20 120 mm 20 mm mm a) Find the centroid of the section and enter the value in the box below! - Centroid = mm b) Find the moment of inertia of the cross-section and enter the value in the box below: - Moment of Inertial, 1 = 106 mm ) Determine the maximum UDL it can carry and enter the value in the box below: - UDL, W = KN/m Note: Do not enter fraction numbers (e.g. 8/5 or 1/2) or Alphabets in the Boxes. When entering decimal numbers, only use DOT as a decimal separator (e.g. 12.45). Do not use COMMA as a separator (e.g. 12,45)