Project Overview The purpose of this project is to design and implement a binary-to-decimal converter that displays a 2-digit decimal number (00-99) using two seven-segment displays. The input will be an 8-bit binary number, which will be converted to its decimal equivalent and displayed on the seven-segment displays. The design must be implemented using only combinational logic components such as logic gates, multiplexers, demultiplexers, encoders, and decoders. Microcontrollers and programmable devices are not allowed. System Requirements A functional and complete project must comply with the following requirements: • The system must accept an 8-bit binary input (0 to 255). • The system must convert the binary input into its decimal equivalent. • The system must display the least significant two decimal digits (00-99) on two seven-segment displays. • The display must be updated in real-time when the binary input changes. • Combinational logic circuits using logic gates, multiplexers, demultiplexers, encoders, and decoders. No microcontrollers, FPGAs, or any programmable devices may be used. • Two seven-segment displays (common anode or common cathode). • Binary input provided using DIP switches or push buttons. • Power supply (typically 5V for logic circuits and display operation). No microcontrollers, FPGAs, or any programmable devices may be used. The ICs that i have access to are, SN74LS32N, SN74LS08N, SN74S151N, SN74LS04N, SN7447AN, KYX-3101B, I just need help designing the Circuit Diagram using these ICs