(Solved): Draw the shear diagram for the member \( B C \). Follow the sign convention. Click on "add vertica ...

Draw the shear diagram for the member \( B C \). Follow the sign convention. Click on "add vertical line off" to add discontinuity lines. Then click on "add segment" button to add Consider the beam shown in (Figure 1). Assume the functions between the lines. frame is pin connected at \( A, C \), and \( D \) and there is a Note - Make sure you place only one vertical line at places that require a vertical line. If you inadvertently fixed joint at \( B \). place 2 vertical lines at the same place, it will appear correct visually because the lines overlap, but the system will mark it wrong. Figure 1 of 1 No elements selected \( V(\mathrm{kN}) \)