Design a bubble diagram and state table. I will design a light controlled lamp and for this I will use logic gates and flip flops (to keep the previous state). For this there are two inputs in the system, these are the manual push button and the digitized ambient light level inputs. Only the manual button works in medium brightness (the light can be turned on and off as desired in medium brightness). In a bright environment the light should be turned off by the system and in a dark environment the light should be turned on by the system. The push button should work like a button (i.e. in a push-release logic). For the digitized input there should be 00 dark, 11 bright, 01 or 10 medium brightness. In medium light the manual control is activated (no manual control from outside, the system continues to work in the same state as in the previous state). In bright the light turns off by itself, in dark it turns on by itself and it cannot be intervened by the manual button from outside.