Construct the reduced stiffness matrix of the shown truss, Fig. 2, then model the problem using suitable element type in ANSYS Mechanical APDL software, (With Screen Capture Step by Step) then, answer the following questions: 1- Determine the nodal displacements for each joint. (10 Marks) 2- Determine the nodal forces in element 3. (10 Marks) Tak

Question

Construct the reduced stiffness matrix of the shown truss, Fig. 2, then model the problem using suitable element type in ANSYS Mechanical APDL software, (With Screen Capture Step by Step) then, answer the following questions: 1- Determine the nodal displacements for each joint. (10 Marks) 2- Determine the nodal forces in element 3. (10 Marks) Take:  (  mathrm{L}(1)= mathrm{L}(2)=2  mathrm{~m},  mathrm{~L}(3)=2  sqrt{2},  mathrm{~A}(1)= mathrm{A}(2)= mathrm{A}(3)=80  mathrm{~mm} 2  ), and  (  mathrm{E}=200  mathrm{GPa}  ). Lab Test will be conducted using ANSYS software. (10 Marks) l1g.4

Accepted Answer

Expert Answer to -   Construct the reduced stiffness matrix of the shown truss, Fig. 2, then model the problem using su

Answer

Solution for -   Construct the reduced stiffness matrix of the shown truss, Fig. 2, then model the problem using su

Answer

This an additional answer to -   Construct the reduced stiffness matrix of the shown truss, Fig. 2, then model the problem using su

(Solved): Construct the reduced stiffness matrix of the shown truss, Fig. 2, then model the problem using su ...

View Expert Answer

Expert Answer

Buy This Answer $5

Place Order

We Provide Services Across The Globe